How To Create A WI-Fi Jammer By HackNet.
This Guide Will Explain How To Create A Wi-Fi Jammer Affordable And Functional, For More Information On The Functioning And Use To Watch The Videos On The YouTube Channel Of Hacknet.
Requirements:
Configuration Guide:
Coupon Configured With Success.
Guide To Use:
Necessary Links:
This Guide Will Explain How To Create A Wi-Fi Jammer Affordable And Functional, For More Information On The Functioning And Use To Watch The Videos On The YouTube Channel Of Hacknet.
Requirements:
- Computer
- Node MCU
- The File .Bin
- Source of Energy (Ex: Power bank)
- Tab Esp8266
- Micro USB Cable
Configuration Guide:
- Download the Necessary Files (Linked at the Bottom of the Post).
- Connect The Board Esp8266 To The PC With The Micro USB Cable.
- Open Node MCU And Select The Item "COM Port" To "COM6"(May Vary Depending On The Coupon, Generally Is Never COM1).
- From Node MCU navigate to "Config" And Pressing the First Gear to the Right; Select the Location Where You Saved the File .Bin.
- From Node MCU Switch To "Advanced" And "Flash Speed" Select The "80 MHz".
- From Node MCU Scroll to "Operation" And Press "Flash (F)".
Coupon Configured With Success.
Guide To Use:
- Connect The Board To A Power Source.
- Connect Any Device To Wi-Fi Created By The Board.
- SSID (Default): Pwned
- Password (Default): Deauther
- Access to the Browser on the Device and Connect To the IP "192.168.4.1".
- Access to Run Properly. From This Point on Is Very Intuitive To Use, For More Info, Watch the Video on the YouTube Channel of Hacknet.
Necessary Links:
- Card Esp8266 :- http://amzn.to/2yefQ0T
- Node MCU (32-Bit) :- http://bit.ly/NodeMCU32
- Node MCU (64-Bit) :- http://bit.ly/NodeMCU64
- File .Bin :- http://bit.ly/FileBinJammer
SHARE BY GK
0 comments:
Post a Comment
Note: only a member of this blog may post a comment.